Site Engineer

• Prepares daily, weekly, and monthly accomplishment reports as well as weekly productivity reports.
• Prepares and updates monitoring charts regularly.
• Issues non-conformance notices to domestic subcontractors for each non-conformance discovered.
• Assists the project team in ensuring good housekeeping within the project site.
• Ensures that the company’s safety and security program is properly implemented.
• Coordinates with the MEP Coordinator or MEP Engineer regarding the progress of works of the MEP contractors in relation to the concrete embedding.
• Reviews the structural and architectural plans as well as precast drawings.
• Reports discrepancies between architectural and structural plans to the Site Manager or TSG Head and shall monitor and follow-up the resolution of the problems or discrepancies.
• Obtains the necessary data (e.g., precast delivery, etc.) prior to scheduled concrete pouring.
• Coordinates the requisition, issuances, and the timely delivery of required materials on site.
• Obtains the necessary documents (e.g., IWR—Installation Work Request, CPR—Concrete Pouring Request) from the QAQC Department prior to concrete pouring.
• Performs quality assessment of formworks and concreting through daily observation and inspection.
• Recommends value engineering or cost-saving measures to the Site Manager or Project Manager.
• Prepares and submits necessary reports required by the Management.
• Fills up and updates the construction logbook daily.

• Coordinates with the warehouseman and general foreman to ensure that all materials and manpower are available on site prior to formworks installation.
• Computes the formworks requirements of the project and submits them to the Site Manager for validation.
• Conducts daily coordination with the formworks leadman and crew.
• Coordinates with TSG regarding the issuance of body plans and other pertinent drawings prior to work execution.
• Supervises the erection of scaffoldings and forms.
• Inspects formworks and precast works prior to concrete pouring.
• Coordinates with QAQC regarding the stripping of forms.
• Monitors progress of formworks stripping and reports potential delay in the formworks cycle due to stripping.
• Recommends if form material is already affecting concrete quality and needs to be replaced.
• Conducts regular inspection to evaluate the quality and integrity of formworks and precast and facilitates the corresponding adjustments at the site.
• Monitors the progress of formworks with respect to the construction cycle.
• Informs the Site Manager and Project Manager of potential delays in the general construction schedule.
• Issues correspondences to domestic subcontractors informing them of their delays.

• Computes and prepares volume projection of concrete for the entire project, concrete volume rebars, and balance to complete computation.
• Prepares the quantity of concrete for pouring area in advance.
• Responsible for the quality control of concreting; checks the following to ensure that it conforms to the specifications:
• Checks delivery receipts to ensure that the concrete received has the correct strength, contains the right amount of aggregate, and checks the time of batching and dispatching.
• Estimates the total volume of concrete needed as per schedule to prevent excess concrete.
• Ensures that the concrete received at the project site has correct slump and consistency.
• Monitors the progress of concreting activities and keeps a record for posting/tabulation.
• Prior to concreting operation, the Site Engineer shall:
• Check if the concrete pouring request is approved by the owner’s representative.
• Ensure that subcontractors have signed the pouring request.
• Ensure that the area for pouring has been certified by the Safety Officer as safe and conforms to safety standards.
• Ensure that proper batter boards are in place and all reference elevations are visible.
• Check the safety of all shoring and water tightness of forms.
• Ensure that vibrators, power trowel, bugles, shovel, float, and other tools are ready.
• Ensure all equipment (pumpcrete, placing boom, etc.) that will be used is in good working condition.
• Ensure that there is sufficient manpower to conduct the concrete pouring activity.
• Ensure that the proper fallback or alternative concreting method is ready in case of emergency.
• Conduct measurement of volume to be poured.
• Keep a record of actual concrete samples taken and schedule them for testing.
• Responsible for preparing the summary of concrete test results to be submitted to the owner’s representative.
• Conduct concrete toolbox meeting.

During concreting operation, the Site Engineer shall:

• Keep track of incoming deliveries.
• Check the quantity, quality, slump consistency, and method of handling of concrete.
• Monitor and evaluate actual pouring of concrete.
• Ensure that pouring is carried out according to the approved work plan.
• Ensure that the concrete is cast to the specified elevations and surface finish.
• Elevation is counter-checked by the Site Engineer along with the surveyor and QA/QC.

After concreting:

• All tools and equipment should be thoroughly cleaned. The surrounding structures and areas shall also be cleaned from laitance concrete.
• Post-concreting reports should be submitted after the concreting activity.
• Discover alternative solutions to solve cause of delay in target schedule and problems related to concreting works.
• Perform other duties and responsibilities assigned from time to time.

Qualification and Skills Requirement

Educational Attainment:

• Bachelor’s degree in Civil and Construction Engineering or any related field.
• Preferably licensed.
• Preferably with NC II in Scaffold Erection.
• Preferably with COSH or safety-related trainings.

Work Experience:

• 0–1 year of experience in construction or real estate industry.
• Experienced in formworks and concreting works.
• Minimum of 1 month or 160 hours of internship experience is considered.

Technical Competencies:

• Knowledge of construction materials, techniques, and industry standards.
• Knowledge of local regulations, codes, and safety standards.
• Proficiency in reading and analyzing construction plans and drawings.
• Knowledgeable in formworks and concreting functions from main components to accessories.